Mon-Fri 9am-8pm, Sat-Sun 9am-5pm

0800 074 0745

Your gas meter

Gas and Electricity Guide

Do you want to know more about your gas meter?  Fair enough.  Gas is one of the biggest household expenses.  You will have noticed energy prices rising rapidly over the past few years.  Knowing more about gas and electricity will enable you to reduce your can help you compare energy prices and switch to the cheapest supplier, which could save you hundreds of pounds. If you’ve got any questions, you can phone our call centre which is UK-based and free to call. Gas and Electricity

Your Gas Meter

A gas meter is used to measure the flow of gas into your home. Most gas meters are installed outside the building.  There are four different types of gas meter: standard meters, dial meters, digital meters and prepayment meters.

Your gas meter shows exactly how much gas your home has consumed.  However, in most cases, gas companies estimate their customer’s usage and then bill them accordingly.  If you want your bill to be accurate, it is important to get a gas meter reading.

•    Why should I read my Gas Meter?
•    How do I read my Gas Meter?
•    How do I switch to a cheaper Gas supplier?

Compare, Switch and Save on Gas and Electricity


Why should I read my Gas Meter?

It’s important to read your gas meter so that you don’t pay too much or too little. Unless you have a prepayment gas meter, your gas company will make an estimate of your gas consumption.  This estimate is usually based on past usage.  If you have reduced your energy consumption, then you could be overcharged.

Alternatively, if you are using more gas than your supplier has estimated, you may receive a surprise when the company next takes a gas meter reading.

The only way to avoid paying too much or too little is to phone your gas supplier and give a correct gas meter reading each time you receive an estimated bill.

How do I read my Gas Meter?

Most households have a standard gas meter, which is mechanical and displays a series of digits.  You’ll need to take a reading of the five black numbers – ignoring any red numbers or any numbers after a decimal point.  Your gas meter will either display your consumption in cubic metres (m3) or cubic feet (ft3).

Alternatively, you may have a dial gas meter – which looks like rows of small clocks.  Record the numbers left to right as indicated by the dial pointers on the four dials.  If the dial pointer is between two numbers, read the lowest of the two numbers – except when the dial pointer is between 0 and 9, in which case you would record the number 9.  When reading your dial gas meter, you should always remember that dials next to each other go round in opposite directions.

How do I switch to a cheaper Gas supplier?

You may be able to save hundreds of pounds by switching to the cheapest gas deal.  Finding the best energy supplier can be can be confusing and time-consuming.  There are a number of different energy suppliers, offering a wide variety of plans and packages.  Fortunately, with, you can compare ALL gas companies and switch in minutes.

Clients List